Bin He ‘s Revit Study Channel
Bin He ‘s Revit Study Channel
  • Видео 1 285
  • Просмотров 3 357 059
24043 - Adaptive Family Exercise
You can download this Revit file from here:
drive.google.com/file/d/1tiAdyE6rQPaUUDL70NSB29HS2ufJat31/view?usp=drive_link
Просмотров: 708

Видео

24042 - Pattern Based Family Exercise
Просмотров 47314 дней назад
This one is very easy. :)
24041 - Pattern Based and Adaptive Family Exercise
Просмотров 69114 дней назад
You can download this Revit file from here: drive.google.com/file/d/1stSd-82jaVCp5bJc_iG9h8ZyoXILpUK-/view?usp=drive_link
24040 - Topo from image and some level changing
Просмотров 38714 дней назад
In this video, we will manually place points to create a topo to match the map image with contours and adjust the project's level, or the topo's level due to different conditions.
24039 - Pattern Based Family Exercise w. Dynamo
Просмотров 48021 день назад
A fairly simple one, with a little bit of Dynamo too. You can download this family from here: drive.google.com/file/d/1r8cFJJF1RgnG_AoVF1jYBply250npEQG/view?usp=drive_link
24038 - Pattern Based Family Exercise
Просмотров 50528 дней назад
You can download this Revit file from here: drive.google.com/file/d/1qz-FnvYhx46b-VYpp0r9qMJSUIxpShWo/view?usp=drive_link
24037 - Curtain Panel and Dynamo Exercise
Просмотров 567Месяц назад
A fairly simple exercise, it works on curtain walls, sloped glazing, and curtain systems.
24036 - Angled Curtain Wall Panel Exercise
Просмотров 789Месяц назад
You can download this file from here: drive.google.com/file/d/1pgRqXLpX7jZODfmLZmqg7nkSFhpZFrda/view?usp=drive_link
23035 - Extract Data from a 2D DWG and create Topo in Revit
Просмотров 796Месяц назад
Sometimes when you have to create a topo in Revit but all you have is a 2D DWG file, this is what you can do. Use the Eattxt command in Autocad to export a CSV file with all the information you need (X Position, Y Position and Value), then in Revit, use Create Surface from Import - Specify Points File.
23034 - Pattern Based Family Exercise
Просмотров 680Месяц назад
You can download this file from here:drive.google.com/file/d/1jwpd2iJ3bNslOtN28B2U2siRMzWVllkk/view?usp=sharing
24033 - Pattern Based Family Exercise
Просмотров 610Месяц назад
You can download this Revit file from here: drive.google.com/file/d/1dIGbI2dt3FEXaUjy_n1pj-52vnSAsLXU/view?usp=drive_link
24032 - Facade Exercise using Model in Place and Curtain Panels
Просмотров 957Месяц назад
You can download this file from here: drive.google.com/file/d/1bevu3k5nAJeL5vDxwLnCQ2JB7TR_Ppah/view?usp=drive_link
24031 - Mass Exercise
Просмотров 529Месяц назад
It's a bit tricky I know, please let me know if there is a better way. Thank you.
24030 - Q&A Session
Просмотров 642Месяц назад
In this video, we wo quickly answer some question in the documents. We will also try the Colcour Scheme and rooms, and some tips and tricks of Sloped Glazing and Curtain Wall.
24029 - Parametric Joinery Family Exercise
Просмотров 1 тыс.Месяц назад
You can download this family(unfinished) from here: drive.google.com/file/d/1NCd60aq0SH9U-Zphm2RqpS-I1c6SqiGy/view?usp=drive_link Can you finish it?
24028 - Some experiment on structural framing family
Просмотров 436Месяц назад
24028 - Some experiment on structural framing family
24027 - Mass & Adaptive Family exercise
Просмотров 1,5 тыс.Месяц назад
24027 - Mass & Adaptive Family exercise
24026 - Parametric Family Exercise - Curved Blade Facade w. Face Based Void
Просмотров 7522 месяца назад
24026 - Parametric Family Exercise - Curved Blade Facade w. Face Based Void
24025 - Tag location of model in place door and how to fix this
Просмотров 3482 месяца назад
24025 - Tag location of model in place door and how to fix this
24024 - model in place "river" in floor and overhead line style
Просмотров 4742 месяца назад
24024 - model in place "river" in floor and overhead line style
24023 - Pattern Base Family Exercise
Просмотров 7332 месяца назад
24023 - Pattern Base Family Exercise
24022 - Custom Stair Tag for R,G and 2R+G
Просмотров 4102 месяца назад
24022 - Custom Stair Tag for R,G and 2R G
24021 - Adaptive Family Exercise
Просмотров 2,7 тыс.5 месяцев назад
24021 - Adaptive Family Exercise
24020 - Pattern Based Family Exercise
Просмотров 6455 месяцев назад
24020 - Pattern Based Family Exercise
24019 - Adaptive Family Twisted Louvres
Просмотров 7575 месяцев назад
24019 - Adaptive Family Twisted Louvres
24018 - Simple Massing Exercise
Просмотров 1,4 тыс.5 месяцев назад
24018 - Simple Massing Exercise
24017 - Model Text Void on Curved Wall
Просмотров 1,6 тыс.5 месяцев назад
24017 - Model Text Void on Curved Wall
24016 - Some modification to the family from last video
Просмотров 4835 месяцев назад
24016 - Some modification to the family from last video
24015 - Two Level Based Family Exercise
Просмотров 7035 месяцев назад
24015 - Two Level Based Family Exercise
24014 - Simple Parametric Adaptive Family Exercise in Revit
Просмотров 6286 месяцев назад
24014 - Simple Parametric Adaptive Family Exercise in Revit

Комментарии

  • @dnts.prasanth5519
    @dnts.prasanth5519 День назад

    Can you make Boulder, Grass, and Plant a parametric one and upload it?

  • @matthiastroitzsch7666
    @matthiastroitzsch7666 День назад

    This will take about 43 years if I do it one by one this way, given my family library. How about a script to automate this process?

  • @igbedominion7590
    @igbedominion7590 2 дня назад

    I searched far and wide and finally got the solution to deleting mullions. Thank you very much

  • @debbiecartagena
    @debbiecartagena 2 дня назад

    glad I found this

  • @nithirasanayagam2947
    @nithirasanayagam2947 3 дня назад

    is it possible to add a gate to the fence , maybe as a door family to have it visible swing in plan as well

  • @dimitarvaradinov4557
    @dimitarvaradinov4557 3 дня назад

    Can you show us how to make variable corrugated steel beam?

  • @aleksandrekordzakhia4406
    @aleksandrekordzakhia4406 5 дней назад

    Thank you

  • @only_mikhail
    @only_mikhail 5 дней назад

    trying to learn dynamo here, can have a copy of yours. hehe

  • @ArchitectUmair
    @ArchitectUmair 9 дней назад

    Satisfying

  • @moeendanish4841
    @moeendanish4841 10 дней назад

    Can I set it up so that I can also see the camera view within view range?

  • @shahbazshan8512
    @shahbazshan8512 10 дней назад

    Hi, i need your help bro, i have created floor and i have kind of pattern which has various types of tiles and various sizes, but i want to calculate actual quantity of that floor how can we

  • @nasserkachlan6867
    @nasserkachlan6867 12 дней назад

    great work Bin!!

  • @jesslee5297
    @jesslee5297 12 дней назад

    Hi can you help me - when I try to insert the frame component into the angles family it does not position itself the same as the video but rather on the side of the reference line. So when I’m in left side view I can see the whole front of the frame

    • @BINHE615
      @BINHE615 11 дней назад

      Have you tried unticking the Always Vertical option in the family?

    • @jesslee5297
      @jesslee5297 11 дней назад

      @@BINHE615 yes 😭

  • @mostafamagdy7995
    @mostafamagdy7995 13 дней назад

    Thanks ❤❤❤

  • @robenhitchcock325
    @robenhitchcock325 13 дней назад

    Hi Bin He, Thanks for the video learned a lot ! Is there a way i could have a parameter like a truss that allows me to assign a structural beam instead of the profiles you make ?

    • @BINHE615
      @BINHE615 13 дней назад

      TBH I am not very sure about structural stuff. I know we can create a truss and use attach top to a roof, but not sure if it is possible to create a truss like this one.

  • @nelsonlee3827
    @nelsonlee3827 13 дней назад

    Great video, how can make the UB to replace the 150 main member, will you like to provide the method to do it, So many thanks

    • @BINHE615
      @BINHE615 13 дней назад

      You can try this: delete the main member, select the reference lines of the main member, untick the is reference to make it a model line, load it into a project, place a UB and use pick line.

    • @nelsonlee3827
      @nelsonlee3827 13 дней назад

      @@BINHE615 thanks, i exprrt you can make video tutorials in this model

    • @BINHE615
      @BINHE615 11 дней назад

      No worries, I have added this into the document.

    • @nelsonlee3827
      @nelsonlee3827 11 дней назад

      @@BINHE615 thanks and waiting for u

  • @afolabivictor5332
    @afolabivictor5332 13 дней назад

    Thank you so much for the lecture. Can you also edit the overall length too so that it stretches?

    • @BINHE615
      @BINHE615 13 дней назад

      Since it is an adaptive family, you can select the adaptive points of the family and move them to adjust the length.

    • @afolabivictor5332
      @afolabivictor5332 12 дней назад

      ​@@BINHE615thank you so much.

    • @afolabivictor5332
      @afolabivictor5332 12 дней назад

      Can I get your WhatsApp contact if you use?

    • @afolabivictor5332
      @afolabivictor5332 12 дней назад

      Can I please get your contact, whatsapp contact?

    • @afolabivictor5332
      @afolabivictor5332 12 дней назад

      How can I reach you?

  • @duongtotu6555
    @duongtotu6555 14 дней назад

    Hi Bin, can u research about model Heydar Aliyev on Revit, i tried anyway but can’t. Appreciate on your help !!! 🙏🙏🙏

    • @BINHE615
      @BINHE615 14 дней назад

      I did briefly talk about this but I always think Revit is not the best tool to model projects like this. I've seen some other youtube videos about modelling it in Revit, give them a try.

    • @duongtotu6555
      @duongtotu6555 13 дней назад

      @@BINHE615yeah i’m gonna to try but i think only way is adaptive family but it’s still not versatille

    • @BINHE615
      @BINHE615 13 дней назад

      Or conceptual mass, basically the same as an adaptive family.

  • @bodlraman7143
    @bodlraman7143 14 дней назад

    super work thanks a lot

  • @giahoang2040
    @giahoang2040 15 дней назад

    thank you soooo much

  • @shorouq141
    @shorouq141 15 дней назад

    you are amazing .. thank you soooo much

  • @maimunashafii2778
    @maimunashafii2778 15 дней назад

    I keep getting a can’t regenerate family error

    • @BINHE615
      @BINHE615 14 дней назад

      This could be because your form is too curved and intersecting with itself, or maybe Revit doesn't understand the sequence of your profiles. If you post an image, I may be able to help.

    • @BINHE615
      @BINHE615 14 дней назад

      docs.google.com/document/d/14UDBuC-dM-GcAC8kh2MKaKFt8cScus_ZTA1t7cEvYM0/edit?usp=sharing

  • @user-dz3yi8rg5b
    @user-dz3yi8rg5b 15 дней назад

    شكرا لك 😍😍😍😍 ياريت تزودنا اكثر مثل هذه الافكار سهلت علينا الكثير من الأعمال مشكور

  • @samoxflox9261
    @samoxflox9261 15 дней назад

    Bin … Why did u uncheck shared parameters although they have different names ?

    • @BINHE615
      @BINHE615 14 дней назад

      There are pros and cons of shared family. For example you will be able to Tab and select the individual frame and edit its parameter if it is loaded into a project as a shared family. However, in this exercise, I want to have that parameter (radius of the individual member) as part of massing family, I have to untick the shared to make it a normal family, then associate that parameter with a parameter in that massing family.

  • @debbiecartagena
    @debbiecartagena 16 дней назад

    Hi Bin, I've been following your lessons and may I ask how did you learn all of this and maybe some tips on how to get started in this field? Thanks a lot!

    • @BINHE615
      @BINHE615 15 дней назад

      Basically, I started to learn Revit by myself in 2014 by following some books. Then I completed a three-year TAFE drafting course, gained 7.5 years of working experience in an architecture firm, and completed a three-year Architecture Bachelor's course. Additionally, I recorded more than 1350 Revit video tutorials. This is how I learned all of this. I think the most helpful parts for me, and probably for you as well, are a proper drafting course followed by some working experience. If you are going to work as a draftsperson in an architectural firm, focus on basic building components and documentation techniques instead of massing, adaptive, and pattern-based families, which are more useful for architectural students.

    • @debbiecartagena
      @debbiecartagena 11 дней назад

      @@BINHE615 Yes, you're definitely right. I see that you've been through a lot, hence, the impressive video lessons. Actually, I'm leaning towards Revit MEP as my main but I also want to learn Revit Arch as my secondary. That is why your videos are good foundation for us who are just starting in this field. It's practical and straightforward. That's why I enjoy following lessons. Keep it up Bin. I hope you can make videos on building components as well 🙂. Thank you very much!

  • @oskorreia
    @oskorreia 16 дней назад

    Hi Bin, about the picture the asker showed.. could you show us how to adapt this pattern to that shape and the ridged edges? How do you do the frame structure under a roof like this?

    • @BINHE615
      @BINHE615 15 дней назад

      I think we just need to add some more points into the spline through points so we can create the shape similar to that roof. I could be trick for the structure, I think adaptive family might work.

  • @debbiecartagena
    @debbiecartagena 17 дней назад

    thanks a ton for this!

  • @flowerdi1458
    @flowerdi1458 17 дней назад

  • @Quivver77
    @Quivver77 18 дней назад

    thank you! please keep doing more vids on Revit custom family creation -- there is very little advanced tutorials on this part of revit.

  • @albatrianoss
    @albatrianoss 18 дней назад

    I just discovered this gem, ur amazing Bin keep up the good work!

  • @aslidinarchitect
    @aslidinarchitect 18 дней назад

    good

  • @mattfred.12
    @mattfred.12 19 дней назад

    Thanks Bin. This is helpful

  • @katieartspace
    @katieartspace 19 дней назад

    Cool❤

  • @nelsonlee3827
    @nelsonlee3827 20 дней назад

    Great, but i want to know the difference between generic family and line base family for curtain wall mullion. And which one is better and function in rear project and easy to modify the profile and many thanks 😊

    • @BINHE615
      @BINHE615 14 дней назад

      I think curtain wall is usually easier, it really depends on what your real project is. If you can post some examples on the shared document docs.google.com/document/d/14UDBuC-dM-GcAC8kh2MKaKFt8cScus_ZTA1t7cEvYM0/edit#heading=h.b5cis5jsfs8k we can discuss further.

  • @robertmarkusneiger6810
    @robertmarkusneiger6810 20 дней назад

    Hi Bin He Setting the reference quota is very simple. The model does not move, but the reference altitude of the project is linked to the sea level altitude. 0 Work in a section view 1 Unpin Survey Point, so it stays there, and it doesn't move down. 2 Go to Manage Project Location Coordinates Specify coordinates at point 3 Select the level Specify Shared Coordinates New Coordinates Elevation input the value set OK 4 check it out with Spot elevation relative to Project base point and Survey Point Best regards RMN

    • @BINHE615
      @BINHE615 15 дней назад

      Thank you very much, Robert, I will have a try.

  • @samoxflox9261
    @samoxflox9261 21 день назад

    Jaaah … great … 1000 thanx Bin After I ‘ve watched yours , I think the best is to move the topo down without messing with levels and only change the project base point elevation For edit points after-wise no worry: from 2024 and up you can show the points relative to : * current level * project base point * survey point * internal origin (??) Usually when you do a project (in school I mean) you start with the building first and then build up the topo later, thus it might be difficult to move the building up. It’s easier to move the topo down By the way the topo solid has some capabilities, but the topo surface is still more accurate than the topo solid. Luckily you can convert the topo surface into topo solid in R24, R25 …. I Wonder why Autodesk doesn’t fix the bug before they continue issuing new versions ! Thanks,

    • @BINHE615
      @BINHE615 15 дней назад

      Thanks for the input, Samer. I am always a bit nervous about all the levels, PBP, and SP issues since I have not had any real work experience on large projects. I mostly work on small projects and don't want to mislead people in any way. We are still on 2023 and will probably go straight to 2025, hopefully getting a better topo tool.

  • @stonelittle9555
    @stonelittle9555 21 день назад

    Very Good!

  • @DušanStević-k7w
    @DušanStević-k7w 21 день назад

    The reason why you couldn't move the object vertically in the first place is because "Constrain" was checked. Uncheck it, and you can move it regardless of the Work Plane.

    • @BINHE615
      @BINHE615 21 день назад

      No, the constrain here means you can only move the object in orthogonal directions, you won't be able to move an element in the direction perpendicular to the associated work plane.

  • @shamiecostales4534
    @shamiecostales4534 22 дня назад

    Hello! I need assistance resolving an issue in Revit. When I change the height of one wall, it affects another wall even if it’s not selected. How can I ensure that only the wall I pick is modified

    • @BINHE615
      @BINHE615 21 день назад

      Not sure, I need more information.

  • @mariaorska4727
    @mariaorska4727 22 дня назад

    For some reason I have 30 steps and I keep getting an error that says cant create sweep. I am having issues with the reference points in elevation

    • @BINHE615
      @BINHE615 21 день назад

      Can you give me a bit more information so I can help you? Alternatively, you can also use "support" for solid handrail.

  • @armandocerrud6650
    @armandocerrud6650 23 дня назад

    Thank you so much

    • @BINHE615
      @BINHE615 21 день назад

      You are welcome.

  • @jps_204
    @jps_204 24 дня назад

    Thanks for the tutorial. I am having one problem... When try to recreate work flow in a project my material parameters for my curtain panel are read-only. Dynamo script runs and reports error that material parameters are read-only. Do you know possible solution? Cheers

    • @BINHE615
      @BINHE615 21 день назад

      Is is a model- in-place in a project? It will not work. You can copy it into a conceptual mass and run the Dynamo there.

  • @Arcade202_89
    @Arcade202_89 24 дня назад

    Jesus, that formula :/

  • @amrallali2219
    @amrallali2219 24 дня назад

    💚💚💚

  • @gordysun
    @gordysun 24 дня назад

    ps I hope you're enjoying architecture school

  • @gordysun
    @gordysun 24 дня назад

    hi thank you. I have a question... when i moved the point up, the bottom face of the roof stayed level (in other words only the points on the top face moved up to create the profile, so ended up with a kind of mass with a flat bottom and profiled top... Any thoughts? Thanks in advance. Oh I just realized this video was uploaded 3 years ago. Doh!

    • @BINHE615
      @BINHE615 21 день назад

      Select the roof - Edit Type - Edit Structure - Untick the Variable option

  • @halimkhan8789
    @halimkhan8789 24 дня назад

    Thank you very much teaching us!

  • @kanizfatima2378
    @kanizfatima2378 26 дней назад

    excellent ,